Technical Data
|
Laser type
|
LE-X-Advance
|
|
Laser medium
|
Diode pumped, 532 nm
|
|
Max Energy
|
2 mJ (TEM00)
|
|
Pulse width
|
< 8 ns
|
|
Stability
|
+/- 1% (pulse to pulse)
|
|
Lifetime of diode
|
12000 hrs
|
|
Electrical connection
|
220V or 110V +/-10% 1000W
|
|
Power consumption max. [kW]
|
1200W
|
|
Typical features
|
3D Sub-engraving and Surface marking
|
|
Mini diameter of a point
|
60 um
|
|
Max diameter of a point
|
200 um
|
|
Engravinging and marking range
|
300×350×100 mm
|
|
Max crystal size
|
320×400×120 mm
|
|
Max engraving rate
|
4500 points/s Position Speed: >9m/s
|
|
Average engraving rate
|
4000 points/s Writing Speed: 600 cps
|
|
Positioning accuracy
|
15 um
|
|
Typical engraving time
|
50*50*80 mm crystal----200K points image: <1 min
|
|
Cooling
|
air
|
|
Other
|
Dimensions (L x W x H;mm)
|
Weight
|
|
|
3d marking system
|
685 x 750 x950mm
|
Approx 110 kg
|
|
|
Painting
|
Light grey
|
|
Documentation
|
1 x
|
|
Operation demands:
|
room temperature : room humidity:
|
|
|
20-28℃ <60%
|
LE-X-advance is the newest multi-functional laser system with sub-engraving and surface marking. It adopt excellent stable diode-pumped high power solid-state laser, ensure whole system work’s high-efficiency, high speed. For sub-engraving crystal, the max engraving rate can reach 4500 points/s, and Writing Speed: 600cps for surface marking. The special optical correction design ensures the engraving resolution up to 600 DPI.
• System is equipped with high power laser head specially designed for high speed sub-engraving and surface marking.
• Laser is emitting the constant energy and operating in a special mode enhancing the sub-engraving quality
•Using optical realignment technology ensuresalmost maintenance-free operation
•Adopting unique photo processing technology reaches the perfect engraving effect
•Using the best tiling technology in the worldreach 300*350 mm engraving range with “zero width edge”
• Laser auto focus , maintenance-free optical path and alignment mechanism make sure very stable engraving quality.
• RS232 interface is used to configure laser component work properly. Eliminates fault induced by manual operation. The processing is “One-Step engraving.”
• Modular design utilizes standard components for easier service
• “Plug-n-play” characteristics give the system ease of installation and a quick start-up time
|
|
|
|
|
